Inclinable Angle Brackets - 2 pcs
The tilting angle shelf brackets for our shelving system are made of powder-coated steel and are sold in pairs. They are suitable for use with any of our single or twin slot wall uprights with 50 mm slot spacing. They were designed specifically for a combination with wood shelf boards, which are placed onto the brackets and then secured with wood screws. These brackets come in left/right sets, giving a cleaner look to the ends of the shelves. The angle shelf brackets can be tilted to 10, 20 or 30 degrees, the perfect angles for displaying newspapers and magazines. We recommend our shelf boards with upstand to prevent items falling off. Our angle shelf brackets are available in three sizes (250 mm, 300 mm and 400 mm) and three finishes. They combine perfectly with shelf boards 25 to 60 cm deep. A pair of tilting angle shelf brackets can hold up to 110 kg. They are not suitable for use with wire shelves or metal shelf boards - find the single slot brackets and wire shelf brackets you need right here in our online shop.
NOTE: Tilting angle shelf brackets can be set to tilt downward at 10, 20 or 30 degrees. Thread the supplied setting screws into the correct bores for the desired tilt angle. The angle shelf brackets can of course also be used at a right angle without tilting. The wood screws needed for securing the shelf boards are not included and must be ordered separately to match the selected shelf board thickness.
Positioning is everything - With tilting angle shelf brackets by REGALRAUM
- 2 inclinible shelf brackets
- powder-coated steel
- in pairs, hold up to 110 kg
- adjustable to a 10, 20 or 30 degree angle